- Copyright (c) 2008-2013 http://www.cngav2.com All Rights Reserved. E-mail: gongafam@163.com
- 公司地址:溫州永嘉甌北和一工業區 銷售熱線:0577-67057711傳真:0577-67985602 聯系人:王先生
- 13868620918
新聞資訊
標準編號 |
標準中文名稱 |
標準英文名稱 |
JB/T10367-2002 |
液壓減壓閥 |
|
GB/T12245-1989 |
減壓閥性能試驗方法 |
Methods of performance test for pressure reducing valves |
GB/T12246-1989 |
先導式減壓閥 |
Pilot-operated reducing valves |
GB/T12244-1989 |
減壓閥一般要求 |
General specification for pressure reducing valves |
GB/T1852-1993 |
船用法蘭鑄鋼蒸汽減壓閥 |
Marine steel flanged steam pressure reducing valves |
GB10868-1989 |
電站減溫減壓閥技術條件 |
Specification of the steam converting valve for fossil power stations |
JB/T7376-1994(2005復審) |
氣動空氣減壓閥 技術條件 |
|
JB/T7310-1994(2005復審) |
裝載機用減壓閥式先導閥 |
|
JB/T53361-1994 |
液壓減壓閥產品質量分等(試行) |
|
JB/T53265-1999 |
先導式減壓閥 產品質量分等 |
|
JB/T2205-2000 |
減壓閥結構長度 |
|
NF P43-035-2000 |
建筑閥門、供水減壓閥和復合供水減壓閥.要求和試驗 |
(Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests.) |
NF A84-420-1991 |
氣焊設備和有關方法、減壓閥入品接頭、尺寸 |
(Equipment for gas welding and allied processes. Pressure regulators inlet connections. Dimensions.) |
NF M88-773-1981 |
商用丁烷容器裝置.低壓固定調節的家用商品丁烷減壓閥 |
(INSTALLATIONS BURNING COMMERCIAL BUTANE. PRESSURE REGULATOR TRIP,LOW-PRESSURE FIXED FLOW,FOR COMMERCIAL BUTANE FOR DOMESTIC USE.) |
NF M88-775-1990 |
裝液態碳氫化合物的鋼瓶.可移動部分和半移動部分用高壓可調減壓閥.功能.標記、試驗 |
(LIQUEFIED HYDROCARBONS SYSTEMS IN CYLINDERS. FIXED ADJUSTEMENT,HIGH PRESSURE REGULATOR FOR MOBILE AND SEMI-MOBILE PREMISES. CONSTRUCTION. OPERATION, MARKING,TESTS.) |
NF M88-737-2003 |
可運輸可再填充液化石油氣瓶用減壓閥 |
(Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG).) |
NF E48-423-2001 |
液壓傳動.減壓閥、順序閥、卸載閥、節流閥和止回閥.裝配面 |
(Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces.) |
ANSI/ASSE 1003-1995 |
家用供水系統用減壓閥 |
(Water Pressure Reducing Valves for Domestic Water Supply Systems) |
ANSI/ASSE 1046-1990 |
熱膨脹減壓閥 |
(Thermal Expansion Relief Valve) |
ANSI Z 21.22a-1999 |
減壓閥和真空減壓閥 |
(Pressure Relief Valves and Vacuum Relief Valves) |
ANSI Z 21.22b-2001 |
熱水供應系統的減壓閥 |
(Relief Valves for Hot Water Supply Systems (same as CSA 4.4b)) |
ANSI/ASTM F 1508-1997 |
用于蒸汽、氣體和液體設備的角型減壓閥規范 |
(Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services) |
ASME A112.4.1-1993 |
熱水器減壓閥排水管 |
(Water heater relief valve drain tubes) |
ASME PTC 25.3-1988 |
安全和減壓閥 |
(Safety and relief valves) |
ASTM E 1008-2003 |
地熱和其它高溫液體設備用減壓閥體的安裝、檢驗及維修用標準實施規范 |
(Standard Practice for Installation, Inspection, and Maintenance of Valve-body Pressure-relief Methods for Geothermal and Other High-Temperature Liquid Applications) |
ASTM F 1795-2000 |
空氣或氮氣系統用減壓閥標準規范 |
(Standard Specification for Pressure-Reducing Valves for Air or Nitrogen Systems) |
ASTM F 1565-2000 |
蒸汽設備用減壓閥標準規范 |
(Standard Specification for Pressure-Reducing Valves for Steam Service) |
ASTM F 1508-1996 |
用于蒸汽、氣體和液體設備的角型減壓閥標準規范 |
(Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services) |
ASTM F 1370-1992 |
船上給水系統用減壓閥 |
(Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard) |
BS EN 1567-2000 |
建筑物閥門、減壓閥和組合減壓閥.要求和試驗 |
(Building valves - Water pressure reducing valves and combination water reducing valves - Requirements and tests) |
BS ISO 5781-2000 |
液壓傳動.減壓閥、順序閥、卸荷閥、節流閥和止回閥.安裝面 |
(Hydraulic fluid power - Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces) |
BS ISO 6264-1998 |
液壓傳動.減壓閥.裝配面 |
(Hydraulic fluid power - Pressure-relief valves - Mounting surfaces) |
prEN 14071-2000 |
液化石油氣(LPG)罐的減壓閥 輔助設備 |
Pressure relief valves for LPG tanks - Ancillary equipment |
BS 6283-2-1991 |
熱水系統中使用的安全和控制裝置.壓力范圍從1bar到10bar溫度減壓閥規范 |
(Safety and control devices for use in hot water systems - Specifications for temperature relief valves for pressures from 1 bar to 10 bar) |
BS 6283-4-1991 |
熱水系統中使用的安全和控制裝置.第4部分:最大供給壓力為12bar,標準尺寸包括DN50的微量繃緊減壓閥規范 |
(Safety and control devices for use in hot water systems - Specification for drop-tight pressure reducing valves of nominal size up to and including DN 50 for supply pressures up to and including 12 ba) |
DIN EN 13953-2003 |
液化石油氣(LPG)用可運輸的可再充式儲氣瓶的減壓閥 |
(Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG); German version EN 13953:2003) |
DIN EN 1567-2000 |
建筑閥門.水減壓閥和組合水減壓閥.要求和試驗 |
(Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests; German version EN 1567:1999) |
JIS B8652-2002 |
比例電動液壓減壓閥及安全閥的試驗方法 |
(Test methods for electro-hydraulic proportional pressure relief valves and electro-hydraulic proportional pressure reducing and relieving valves) |
JIS F0504-1989 |
船上機械裝置用減壓閥的應用和壓力調節 |
(Application and setting pressure of relief valves for ships' machinery) |
UL 1478-1995 |
消防泵減壓閥 |
(Fire pumps relief valves ) |
UL 1468-1995 |
防火設備用直接控制的減壓閥和壓力控制閥 |
(Direct acting pressure reducing and pressure restricting valves ) |
JIS B8666-2001 |
液壓動力.減壓閥.安裝表面 |
(Hydraulic fluid power -- Pressure-relief valves -- Mounting surfaces) |
JIS B8372-1994 |
氣動裝置用減壓閥 |
(PRESSURE REDUCING VALVES FOR PNEUMATIC USE) |
JIS B8664-2001 |
液壓動力.壓力控制閥(不包括減壓閥)、順序活門、釋荷閥、節流閥和止回閥.安裝表面 |
(Hydraulic fluid power -- Pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces) |
JIS B8410 AMD 1-2003 |
水管用減壓閥(修改件1) |
(Pressure reducing valves for water works (Amendment 1)) |
JIS B8651-2002 |
比例電動液壓減壓閥試驗方法 |
(Test methods for electro-hydraulic proportional pressure relief valves) |
JIS B8410-1999 |
水管用減壓閥 |
(Pressure reducing valves for water works) |
ISO 15500-12-2001 |
道路車輛.壓縮天然氣(CNG)燃料系統元部件.第12部分:減壓閥 |
(Road vehicles - Compressed natural gas (CNG) fuel system components - Part 12: Pressure relief valve (PRV)) |
ISO 6264-1998 |
液壓傳動.減壓閥.裝配面 |
(Hydraulic fluid power - Pressure-relief valves - Mounting surfaces) |
ISO 5781-2000 |
液壓傳動.減壓閥、順序閥、卸荷閥、節流閥和止回閥.裝配面 |
(Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces) |